Core Drilling Rigs

Back to Drilling Rigs

Truck Mounted Drilling Rigs

	TCR20
	CDR 400M
	CDR 600M
	CDR 1500M

Tractor Mounted Drilling Rigs

Self Propelled Rigs


TC 40	CDR 1000

CDTH 300	CDTH

CORE cum DTH / ROTARY DRILL RIG CDR 400/CDR 700 CDR 1500

DTH Drilling Rig

Description	Models
	CDR 400		CDR 700		CDR 1500
Drilling Capacity:	NQ 400 mtrs 0 to 45º	DTH / ROTARY 200 mtrs ---	NQ 700 mtrs 0 to 45º	DTH/ROTARY 450 mtrs---	NQ 1500 mtrs 0 to 45º	DTH/ROTARY 1000 mtrs 111
Angle Hole Drilling	(Under Favourable Drilling Condition)
Mast: Type of Construction Centraliser opening Rotary Head Travel Rod Handling Capacity	Sturdy Structural Box 300 mm 7.0 mtrs 6 mtrs		Sturdy Structural Box 300 mm 7.0 mtrs 6 mtrs		Sturdy Structural Box 457 mm 10.0 mtrs 9.0 mtrs
Rotary Head: (Speeds & Torques) Speed I, Torque – I Speed II, Torque – II Speed III, Torque – III Speed IV, Torque – IV	Speeds – Torques 600 – 55 Kg-m 125 – 250 Kgm ……………….. ………………..		Speeds – Torques 900 – 70 Kg-m 500 – 125 Kg-m 185 – 340 Kg-m 103 – 608 Kg-m		Speeds – Torques 1000 – 100 Kg-m 625 – 160 Kg-m 160 – 620 Kg-m 100 – 1000 Kg-m
Feed System: Pull up Force (Max.) Full down force (Max.) Rapid Speed (Up)	7363 Kgf 5054 Kgf 20 m/min		16,500 Kgf 10,000 Kgf 20 m/min		35000 kgf 13500 kgf 23 m/min
Hydraulic System: Max. Operating pressure Filtration (Nom) Tank Capacity	200 bar 10 microns 750 ltrs		225 bar 10 microns 800 ltrs		230 bar (open loop) 300 bar (closed loop) 10 microns 800 ltrs
Prime Mover: Input Drive	Driven by Suitable Diesel engine		Driven by Suitable Diesel engine		Driven by Suitable Diesel engine
Levelling Jacks: Qty Cylinder Bore X Stroke	4 Nos. Ø 125 mm X 610 mm		4 Nos. Ø 125 mm X 610 mm		4 Nos. Ø 125 mm X 610 mm
	(System Consists of Reverse flow Restricted Valves)
Main Hoist: Bare drum Pull Bare drum speed Drive Cable Diameter	5000 Kgf 40 mtrs/min Hydraulic Motor 16mm		10,000 Kgf 30 mtrs/min Hydraulic Motor 16mm		15,000 Kgf 40 mtrs/min Hydraulic Motor 22mmf
Mud Pump: Max. Flow Max. Pressure Drive	75 LPM 32 Kg/cm² Hydraulic		107 LPM 38 Kg/cm² Hydraulic		149 LPM 45 Kg/cm² Hydraulic
Wire Line Winch: Bare drum Pull Bare drum speed Drive	480 Kgf 60 mtrs/min Hydraulic Motor		1000 Kgf 100 mtrs/min Hydraulic Motor		2000 Kgf 150 mtrs/min Hydraulic Motor

Compressor/Rod changer/Hoist/Water pump with drive are offered as the per the requirement of the customer technical specifications.
GETECH Industries Products can be supplied in custom – built models in various configurations, Mounting features to suit all special requirements and Technical specifications can be offered accordingly.

(In view of continuous R&D and Product Improvement programme all specifications, features etc., are subject to amendments without prior notice)

TRACTOR MOUNTED HYDRAULIC RIGS

CORE HOLE DRILLING BLAST HOLE DRILLING BOREWELL DRILLING

Tractor Mounted Hydraulic Rigs

GETECH's Hydraulically operated Tractor Mounted Rigs are specially designed for fast & cost effective drilling by air, mud or foam drilling methods using down-the-hole hammers & bits, core barred and tools, rotary tricone bits and other conventional tools as per customer’s choice, Hydraulic system powered by Tractor engine is operated by fixed displacement pumps, which regulates, rotary head speed, feed etc., Centralized control board located close to the drilling point ensures convenience of operation, GETECH Rigs require minimum maintenance and easy to operate.

Technical Data

Description	Core Drilling Rig – TC – 40	Blast Hole Drilling Rig – TBH – 40	Borewell Drilling Rig – TBW - 40
Capacity Drill hole Dia. Drill Depth Over Burden Drill Dia Over Burden Drill Depth	76 mm (Core Dia.:54mm) 150 Ft. -------- --------	4.5” 150 Ft. 6.0” 150 Ft.	4.5” 500 Ft. 6.5” 150 Ft.
	(Under favorable drilling conditions)
Hydraulic System a) Prime Mover b) Feed Pull up Force Pull Down Force Pull Down Speed Pull up Speed c)Rotation Speed Torque Optional Two speed R.H.	Tractor Engine 4500 Kgf 2300 Kgf 30 m/min. 24 m/min 0-450 rpm 30 Kgf 0-450 rpm 30 Kgf 0-60 rpm 225 Kgf	Tractor Engine 4500 Kgf 2300 Kgf 30 m/min. 24 m/min 0-450 rpm 30 Kgf -------- --------	Tractor Engine 4500 Kgf 2300 Kgf 30 m/min. 24 m/min 0-450 rpm 30 Kgf --------- ---------
Compressor: Min Suggested	-------	450 CFM & 150 PSI	500 CFM & 200 PSI
Rod Changer	---------	Single Rod Changer	Single Rod Changer
Water Pump : Capacity Suggested min. Drive & Mounting	75 LPM @ 35Kgf/cm² Trailer Mounted Separate Engine Drive	--------	36 LPM @ 28Kgf/cm² Hydraulic
Hoist:	2.5 Tons @ 30 mtrs/min	---------	--------------

GETECH Products can be supplied in custom – built models in various configurations, Mounting features to suit all special requirements and Technical specifications can be offered accordingly. (In view of continuous R&D and Product Improvement programme all specifications, features etc., are subject to amendments without prior notice)

SELF PROPELLED SIKD MOUNTED RIG

MULTIPURPOSE CORE DRILLING RIG, BLAST HOLE DRILLING

Multipurpose Core Drilling, Water, Blast hole Drilling Rig

Technical Specifications

Description	Core Drilling Rig - TC - 40	Blast Hole Drilling Rig - TBH - 40	Borewell Drilling Rig - TBW - 40
Capacity Drill hole Dia. Drill Depth Over Burden Drill Dia Over Burden Drill Depth	76 mm (Core Dia.:54mm) 150 Ft.------------	4.5” 150 Ft. 6.0” 150 Ft.	4.5” 500 Ft. 6.5” 150 Ft.
	(Under favorable drilling conditions)
Hydraulic System a) Prime Mover b) Feed Pull up Force Pull Down Force Pull Down Speed Pull up Speed c)Rotation Speed Torque Optional Two speed R.H.	Tractor Engine 4500 Kgf 2300 Kgf 30 m/min. 24 m/min 0-450 rpm 30 Kgf 0-450 rpm 30 Kgf 0-60 rpm 225 Kgf	Tractor Engine 4500 Kgf 2300 Kgf 30 m/min. 24 m/min 0-450 rpm 30 Kgf -------- --------	Tractor Engine 4500 Kgf 2300 Kgf 30 m/min. 24 m/min 0-450 rpm 30 Kgf --------- ---------
Compressor: Min Suggested	--------	450 CFM & 150 PSI	500 CFM & 200 PSI
Rod Changer	--------	Single Rod Changer	Single Rod Changer
Water Pump : Capacity Suggested min. Drive & Mounting	75 LPM @ 35Kgf/cm² Trailer Mounted Separate Engine Drive	-------- --------	36 LPM @ 28Kgf/cm² Hydraulic
Hoist:	2.5 Tons @ 30 mtrs/min	--------	--------

CDTH300 CORE cum DTH DRILL RIG

DTH-Waterwell

General:CDTH300 Model, Top Head drive hydraulically operated drill Rig is capable of drilling in any kind of medium to hard rock formation to extract mineral samples by core drilling and non coring by DTH method up to a maximum depth of 300 Meters. Under favorable drilling conditions. The following are the detailed specifications.

Technical Specifications

Description

Model: CDTH300 CORE cum DTH DRILL RIG

Drilling Capacity:
NQ
HQ
Angle drilling
Max Depth
Max Drilling

Core Drilling	DTH Drilling
300 m (980 feet)	----
200 m (650 feet)	----
45 Deg	----
	140 mm (5.5”)
	300 m (980 feet)

Carrier Truck:
Make
Model
GVW
Engine Rating

Truck for the mounting of Rig, compressor and Mud pump.
Ashok Leyland
2516H - 6x4
25 Tonne
163ps @ 2400Rpm

Prime Mover:

The system shall be powered by a Truck engine with suitable PTO arrangement.

Mounting Platform Structure

Electrically welded steel structure covered with 5mm Chequred plate.

Mast Assembly:
Mast overall Length
Rotary Head travel
Centralize opening

Sturdy structural RHS tubular structure electrically welded.
10000mm
7000mm
10.6” (270mm)
Raising and Lowering: by Hydraulic Cylinder
For angle drilling mast will be provided with sliding arrangement.

Feed System

Feed cylinder Size & stroke
Pull Back
Pull Down
Hoisting speed
Reeving Ratio

Feed & Hoist actuation: double acting hydraulic cylinder, Pulley and wire rope.
Dia 125 mm x Dia 80mm x 2350mm
8900 Kgf
5300 Kgf
(UP) 45Mtr/ Minute
1:3
Feed system consists of Hold back arrangement to control limit weight on bit, rapid and slow feed arrangement to suit variable ground condition.

Rotary Head Assembly:
(Top Head Drive)
Torque / Rotation Speed

Fabricated steel body and spur gear reduction Stage-2
0-180 kg.m / 0-200 RPM

Stage-1
0 – 80 kg.m / 0-1000 Rpm

The RH unit travels on Mast assembly of sturdy construction to absorb sudden shock loads encountered during drilling operation.
Swing/Slide out arrangement

Hydraulics:

Max operating pressure
Hydraulic Tank capacity
Filtration (Nom) – Return line

The entire Equipment is designed to operate at high temperature encountered in the normal weather conditions.
Open loop circuit with variable displacement piston pumps and proportional valves for feed and rotation. Diverter valves for auxiliary drives.
220 Kg/Cm2
550 Liters.
10/25 Microns
Cooling: Fin type oil to Air.

Control Panel:

All Necessary control and monitoring valves and gauges are installed at control panel located nearer to drilling point for driller convenience

Stabilizer:
Cylinder bore / Stroke
No. Of Jacks

Model: Hydraulically operated double acting cylinder
125mm (4.9”)/610mm (24”)
4 Nos.
The above jacks are provided with ‘Reverse Flow restricted’ valves to ensure safe operation.
Two rear jacks are operated with two separate valves and two front jacks are operated with a single valve.

Rod holder:

The drill Rig is equipped with hydraulic operated drill rod holder for NQ to HQ

Mast raising Cylinder:
Cylinder bore diameter
Stroke
Qty.

For raising and lowering the Mast Assembly
100mm
800mm
2 No.’s

Mud Pump:

Max Flow
Max. Pressure

Hydraulically driven Triplex single acting pump for carrying out the core drilling operations.

120 Liter/minute
40 bar

Wire Line winch Assembly:
Line pull (Bare Drum)
Max. Speed (Bare Drum)
Wire drum Capacity
Wire diameter
Drive

Hydraulically operated winch for wire line drilling

1000 Kgf
100Mtr/Minute
300 Mtr.
8mm
Hydraulic Motor

Main Hoist Assembly:

Line pull (Bare drum)
Max. Line speed
Wire dia
Drive

Hydraulically operated hoisting winch for handling casing pipes and drill pipes.
5000Kgf
40Mt./Minute
16mm
Hydraulic Motor

Air compressor:
Make/Capacity

Air compressor will be mounted on rig carrier truck.
ELGI or equivalent / 1100 Cfm/300 PSI

Air line lubricator:
Make
Capacity
Tank

Air line lubricator for DTH Hammer lubrication.
Spinc
1400 cfm/ 350 psi
13 lts.

Note:

In view of continuous R&D and product improvement programme all specification; features etc. are subjected to amendments with out prior notice.
GETECH Industries drilling rigs can be supplied in custom-built models in various configurations and Mounting features to suit all special requirements.